Alpine Foundation Pros logoAlpine Foundation ProsFoundation Repair · Alpine, UT
Foundation Crack Repair photo

Alpine Foundation Pros

Foundation Crack Repair in Alpine, UT

Foundation crack repair in Alpine, UT: epoxy and polyurethane injection, same-day service, free estimates.

  • 15+ Years local experience
  • 500+ Projects completed
  • Licensed & Insured

Serving Alpine and nearby communities.

A crack that looked fine in the fall sometimes isn't fine come spring. Freeze-thaw cycling on the Wasatch bench works at small cracks all winter, widening them a little at a time. That's why so many Alpine homeowners notice cracks right after the thaw.

Alpine Foundation Pros repairs foundation cracks with the method that matches the crack type: epoxy for structural bonding, polyurethane for flexible, moisture-blocking seals. Not every crack needs the same fix. We'll tell you which one yours needs before we touch it.

What's included

What's Included in Crack Repair

Typically included: Optional: Customer prep:

  • Crack assessment (width, depth, whether it's actively moving)
  • Injection with epoxy or polyurethane, matched to the crack
  • Surface finish to blend with the existing wall
  • Interior moisture monitoring after the repair
  • Exterior grading review if water is tracking toward the crack
  • Clear access to the cracked wall section, inside or outside
  • Take a photo of the crack now so we can compare it at the visit

How it works

How We Repair a Foundation Crack

  1. Crack Inspection photo
    Step 1

    Crack Inspection

    Each crack is examined to determine type, width, and cause.

  2. Surface Cleaning photo
    Step 2

    Surface Cleaning

    Debris and loose material are removed from the crack area.

  3. Injection Port Setup photo
    Step 3

    Injection Port Setup

    Ports are installed along the crack to allow material injection.

  4. Sealant Injection photo
    Step 4

    Sealant Injection

    Epoxy or polyurethane is injected to fill and bond the crack.

  5. Surface Finishing photo
    Step 5

    Surface Finishing

    Excess material is removed and the surface is smoothed.

  6. Final Inspection photo
    Step 6

    Final Inspection

    The repair is checked to confirm a watertight and stable seal.

Materials

Materials and Methods for Foundation Crack Repair

  • Epoxy Injection Resin photo

    Epoxy Injection Resin

    Bonds structural cracks for added strength, the right call when the crack is stable but needs load transfer restored.

  • Polyurethane Foam Sealant photo

    Polyurethane Foam Sealant

    Expands to fill cracks and block water infiltration, better suited to cracks that still see minor movement.

  • Injection Ports photo

    Injection Ports

    Allow controlled delivery of sealant into the crack cavity from top to bottom.

  • Surface Primer photo

    Surface Primer

    Prepares concrete surfaces for proper material adhesion before injection.

  • Masonry Patch Compound photo

    Masonry Patch Compound

    Used to finish and blend repaired surface areas with the surrounding wall.

  • Protective Topcoat photo

    Protective Topcoat

    Applied to shield the repaired area from the next spring's moisture.

Timeline

How long does a Crack Repair take?

Most crack jobs wrap up in a single visit.

  1. 01

    Consult and crack assessment

    same day
  2. 02

    Injection and seal

    half day
  3. 03

    Surface finish

    same visit

  4. 04

    Final check

    before the crew leaves

Need a schedule that fits?

Get a Free Estimate

FAQs

Foundation Crack Repair FAQs

Is a hairline crack in my foundation normal or a sign of bigger problems?

A hairline crack that stays the same width over time is usually cosmetic. One that's growing, stair-stepping, or letting water through signals something more active and worth a professional look.

Can I just patch a crack myself?

For a small, stable hairline crack, a basic concrete caulk can hold for a while. But caulk doesn't bond structurally and won't stop a crack that's still moving. If it's widening or leaking, call a pro before patching over it.

How much does foundation crack repair cost in Alpine?

Most crack injection jobs run a few hundred dollars up to around $1,500, depending on crack length and whether it's structural or cosmetic. A free estimate gives you the exact number.

Do I need a permit for crack repair?

Usually not. Cosmetic or non-structural crack injection typically doesn't require a permit in Utah County.

If I search foundation crack repair near me, what should I expect?

Most local searches land on either a same-day injection job for a stable crack, or a referral to a full pier assessment if the crack turns out to be active settlement. We'll tell you which one applies after a look at the wall.

Before & after

Before and After Foundation Crack Repair

  • Foundation Crack Repair photo
    Before
  • Foundation Crack Repair photo
    After

Next step

Get a Foundation Crack Repair Estimate in Alpine

Seeing a crack grow? Call +1 (435) 432-0314 or request a free estimate below and we'll look at it before it gets worse.

Home | Contact | Foundation Repair

Ask about Foundation Crack Repair

Tell us about the project and how to reach you.

Call (435) 432-0314