Alpine Foundation Pros
Concrete Lifting in Alpine, UT
Concrete lifting in Alpine UT uses hydrophobic polyurethane foam to relevel sunken slabs same-day. Free estimates, no tear-out needed.
- 15+ Years local experience
- 500+ Projects completed
- Licensed & Insured
Serving Alpine and nearby communities.
A sunken slab isn't usually a sign the concrete itself failed, it's a sign the soil underneath it settled. On Alpine's bench lots, that settlement shows up most often near driveways, patios, and walkways where the original grading got compacted fast during the area's 1970s-90s growth years.
Alpine Foundation Pros uses polyurethane concrete lifting (polyjacking) instead of mudjacking or full slab replacement. Hydrophobic foam goes in through dime-sized drill holes, expands to fill the void under the slab, and lifts it back to grade in hours, not days. The foam itself resists moisture, which matters on ground that sees spring runoff and freeze-thaw cycling every year.
Before & after
Before and After Concrete Lifting
Before 
After
Codes & permits
Permits and Codes for Concrete Lifting
Permit needs are rare for this type of work, but confirm with your city if the slab ties into a public right-of-way.
| Typically needs a permit | Often no permit |
|---|---|
| None typically required for standard slab releveling | Polyurethane foam injection and slab lifting |
| — | Drilling and patching access holes |
| — | Leveling driveways |
| — | patios |
| — | sidewalks |
| — | similar flatwork |
Need help with permits?
Get a Free EstimateCost
What does a Concrete Lifting cost in Alpine?
Price depends on slab size and how much void space the foam needs to fill underneath.
| Project type | Typical range | What’s included |
|---|---|---|
| Small slab section | $300–$800, | single sidewalk panel or small patio corner. |
| Standard driveway or patio slab | $800–$2,500, | typical single-slab lift. |
| Multi-slab project | $2,500–$6,000, | several connected sections releveled in one visit. |
| Severe settlement with large voids | $4,000–$8,000, | deeper fill and multiple injection points. |
These are typical local ballparks — final cost depends on scope, materials, and site conditions. A free estimate gives you an accurate, itemized number for your home.
Want a number for your home?
Get a Free EstimateNext step
Get a free estimate based on your slab's size and condition.
DIY vs pro
DIY vs Hiring a Pro for Concrete Lifting
| DIY | Hire a pro |
|---|---|
| Filling minor surface cracks with a concrete crack filler | Foam injection requires pressure control equipment a homeowner can't rent and use safely |
| Monitoring a slight slope to see if it worsens before calling | Matching lift height precisely to avoid over-lifting or uneven results |
| — | Any slab showing active, worsening settlement rather than a one-time dip |
Not sure DIY vs pro?
Get a Free EstimateWhen to call
When to Call for Concrete Lifting
Call (435) 432-0314 for a free estimate before the gap gets worse.
- A driveway slab that's noticeably sunk near the garage threshold
- A patio corner holding water instead of draining
- A trip-hazard edge where one slab sits higher than its neighbor
Seeing warning signs?
Get a Free EstimateFAQs
Concrete Lifting FAQs
Is polyjacking better than mudjacking for a sinking driveway?
For most Alpine homes. Polyurethane foam weighs a fraction of what mud slurry weighs, so it doesn't add extra load to soil that's already settling. It also resists moisture, which matters with spring runoff and freeze-thaw cycling.
How much does concrete lifting cost in Alpine?
Most single-slab jobs run $800 to $2,500. Smaller sections cost less, multi-slab projects with larger voids cost more. A free estimate gives you an exact number.
How long does concrete lifting take?
Most slabs lift in a few hours and are usable the same day. Larger multi-slab projects can take a full day.
How it works
Our process
Step 1Surface Assessment
Uneven or sunken concrete areas are identified and measured.
Step 2Drilling Access Holes
Small holes are drilled into the concrete to allow material injection.
Step 3Material Injection
Expanding foam is injected beneath the slab to raise it evenly.
Step 4Elevation Monitoring
Lift progress is measured to achieve the desired level.
Step 5Hole Patching
Access holes are filled and finished to match the surrounding surface.
Step 6Final Inspection
The lifted area is reviewed for levelness and stability.
Materials
Materials and methods we use
Polyurethane Foam
Expands beneath slabs to lift and stabilize concrete surfaces.
Injection Ports
Allow controlled placement of lifting material under the slab.
Patch Compound
Fills drilled access holes for a smooth finish.
Surface Sealant
Protects the repaired area from moisture and staining.
Leveling Gauge
Used to measure and confirm slab elevation during lifting.
Bonding Agent
Improves adhesion between new patch material and existing concrete.
Questions on materials?
Get a Free EstimateMore services
Other Foundation Repair services
Foundation Repair
Foundation repair in Alpine, UT: crack injection, piering, underpinning, and wall support with free written estimates.
Piering and Underpinning
Piering and underpinning for Alpine, UT homes: steel push piers, helical piers, and load transfer with free estimates.
Wall Stabilization
Wall stabilization for bowing basement walls in Alpine, UT: anchors, carbon fiber, and steel bracing, free estimates.
Ask about Concrete Lifting
Tell us about the project and how to reach you.